Skip to main content
Troubleshooting Zebra Printers in Jolt
Curtis Nash avatar
Written by Curtis Nash
Updated over a week ago

Troubleshooting Zebra Printers in Jolt

Overview: If you encounter issues with your Zebra printer not printing, this guide will help you identify and resolve the problem.

Steps to Troubleshoot Your Zebra Printer

  1. Update Your Apps and Operating System:

    • Jolt App: Ensure the Jolt App is updated to the latest version. Go to the App Store and check for updates.

    • Operating System: Make sure your device's operating system is up to date. Go to Settings > General > Software Updates to check for available updates.

  2. Check Printer Status in Jolt:

    • Go to Labels > Three-dot menu > Printer Settings > Status tab.

    • Review the printer status. Common statuses and fixes include:

      • Out of Labels: Check if the label roll is empty. If so, replace the roll. If the issue persists, the printer might need calibration or have a faulty sensor. Refer to our calibration guide here.

      • Printer Paused: Check if the pause icon is lit on your printer. Press the pause button to resume printing. If another error appears, refer to the corresponding troubleshooting steps.

      • Lid Open: Ensure the printer lid is closed securely. Press the pause button to resume printing.

      • Printer Not Found: This error can have various causes. Troubleshoot based on your connection type (Wired, Bluetooth, Wi-Fi/Ethernet).

  3. Printer Not Found - Connection Error:

    • Wi-Fi / Ethernet:

      • Ensure the Wi-Fi network is private or password-protected and that the iPad is connected to this network.

      • Check that the network is 2.4 GHz, as Jolt does not connect to 5 GHz networks.

      • Test connection with another device to determine if the issue is with the printer or your device.

      • Perform a network test in the settings. For detailed steps, refer to our network test guide here.

      • If green checks are shown, remove the printer and set it up again via Settings > Printers in the Jolt Mobile App.

      • If the printer still won't connect, perform a power cycle and factory reset of the printer. If issues persist, consult our Interference Troubleshooting guide or contact our Support Team at 877-396-4112 Ext. 1.

    • Bluetooth:

      • Restart the iPad. Follow the Apple support article for instructions.

      • Turn off Bluetooth on all nearby iPads and reset the Bluetooth connection by going to Settings > Bluetooth, selecting “i” next to the device, and choosing Forget This Device. Turn Bluetooth off for 10 seconds and then back on.

      • Ensure the printer is not connected to another device. If the printer was made in December 2019 or later, hold the feed button until the data light blinks to enter pairing mode.

      • Remove and re-add the printer in the Jolt Mobile App. If issues persist, consider switching to a Wi-Fi connection or perform a power cycle and factory reset of the printer. For further assistance, contact our Support Team at 877-396-4112 Ext. 1.

    • Wired:

      • Restart your device and check the printer status. Refresh the status on the labels page if needed.

      • Remove and re-add the printer in the Jolt Mobile App. If problems continue, contact our Support Team at 877-396-4112 Ext. 1.


FAQ

Q: What should I do if my Zebra printer is showing "Out of Labels"?

A: Check if the label roll is empty and replace it if necessary. If the issue persists, the printer may need calibration or have a faulty sensor. Refer to our calibration guide for steps.

Q: How can I fix a "Printer Paused" status?

A: Press the pause button on your printer to resume printing. If other errors appear, follow the troubleshooting steps for those specific errors.

Q: My printer status shows "Lid Open." What should I do?

A: Ensure the printer lid is closed securely. Press the pause button to resume printing.

Q: What should I do if my printer is not found?

A: Troubleshoot based on your connection type (Wired, Bluetooth, Wi-Fi/Ethernet). Check network settings, restart devices, and perform resets if necessary. For detailed guidance, follow the steps in the troubleshooting section or contact our Support Team.

Q: How do I perform a factory reset on my Zebra printer?

A: Refer to the printer’s user manual for instructions on performing a factory reset. Generally, this involves holding down a specific button or combination of buttons.

Q: Who should I contact if I cannot resolve the issue?

A: If you are still experiencing problems after following the troubleshooting steps, please reach out to our Support Team at 877-396-4112 Ext. 1 for further assistance.

Did this answer your question?