Skip to main content
All CollectionsSetup and Account Management
Jolt App Zebra Printer Setup Guide
Jolt App Zebra Printer Setup Guide
Curtis Nash avatar
Written by Curtis Nash
Updated over a week ago

Jolt App Zebra Printer Setup Guide

Follow these instructions to set up your Zebra printer using the Jolt app. There are four connection options: Wi-Fi, Bluetooth, USB, and Ethernet. Choose the method that best suits your needs.


Connection Options:

Wi-Fi (Recommended for Wireless):

  • Reliable for maintaining connections.

  • Must be a private, password-protected network.

Bluetooth (Not Recommended):

  • Prone to disconnections, especially if the device moves more than 15 feet from the printer.

USB (Recommended for Cable on Android):

  • Available only for Android devices.

  • Does not require Wi-Fi or Bluetooth.

Ethernet (Recommended for Cable):

  • Connect to a router for stable connectivity.


Bluetooth Setup:

  1. Open the Settings on your tablet.

  2. Go to the Bluetooth menu.

  3. Ensure the printer's serial number (50J or 50N) appears and shows as connected.

    • If not, forget the connection and search again.


Jolt App Setup Instructions:

  1. Open the Jolt App:

    • Go to Settings > Printers.

    • Accept any pairing requests.

  2. Find the Printer:

    • Refresh the search if the printer doesn’t appear.

    • Select the Zebra printer (50J or 50N).

  3. Connect the Printer:

    • Enter the password if prompted and select Connect.

    • If using Wi-Fi, skip if already connected.

    • For Bluetooth, close the pop-up if it's not needed.

  4. Finalize Setup:

    • Once connected, select Continue.

    • Retry and select Test Print to confirm the connection.

    • Name the printer (e.g., Kitchen Printer, Office Printer).

    • Choose a label size and select Done.


Your printer should now be connected and ready for use. If you encounter any issues, please contact Jolt Support for assistance.

4o

Did this answer your question?