How to Perform a Network Reset on Your Zebra Printer
Resetting your Zebra printer's network settings allows you to clear saved Wi-Fi credentials and establish a fresh connection. Follow these steps:
Network Reset Steps:
Turn Off the Printer:
Ensure the printer is powered off.
Initiate Reset:
Press and hold the PAUSE and CANCEL buttons.
While holding these buttons, turn the printer on.
Release the POWER button once the lights turn on.
Complete the Reset:
Continue holding PAUSE and CANCEL until the status indicator turns green.
The network light on the far right should turn red.
If the light remains green, repeat the process.
Note: This will not erase Bluetooth connections. For a full factory reset, see How to Perform a Factory Reset on Your Zebra Printer.
Related Articles