1. How to Run a Network Test
If you’re having trouble connecting to your printer via Wi-Fi, running a network test can help identify the issue. Here’s how to do it:
Prerequisites: You will need two devices for this test.
Steps:
Open the Printer Settings:
On your device, go to the Labels section.
Tap the three-dot menu (⋮) to access Printer Settings.
Select the Connection Tab.
Start the Network Test:
Tap Run Network Test.
Choose Your Test Mode:
You will see options for Host and Client.
On Device 1, select Host.
On Device 2, select Client.
Tap Next on both devices.
Complete the Test:
Device 1 will display a QR code.
Device 2 will need to scan this QR code or enter the IP address shown.
Tap Next to start the test.
Review the Results:
The test will show you results for TCP Communication and UDP Communication.
If you see an “X” indicating a problem, it may be a network issue. Contact Jolt Support or your company IT department for further assistance.
2. How to Reset Network Settings
Resetting your printer’s network settings should be your last step if other troubleshooting methods haven’t worked.
Steps:
Access Printer Settings:
Go to the Labels section.
Tap the three-dot menu (⋮) and select Printer Settings.
Choose the Connection Tab.
Initiate Network Reset:
Tap Reset Network Settings.
Confirm Reset:
A warning message will appear, asking if you want to proceed.
Tap Continue to confirm.
Reboot the Printer:
The printer will reboot, indicated by changes in the printer lights.
Reconnect Your Printer:
After the reboot, follow the Add Printer workflow to reconnect your printer to your network.
Additional Resources:
Network Troubleshooting Guide
Add Printer Workflow
If you encounter any issues or need further help, don’t hesitate to reach out to Jolt Technical Support for assistance.