Skip to main content
All CollectionsSetup and Account Management
Temperature Probe Setup Guide
Temperature Probe Setup Guide
Curtis Nash avatar
Written by Curtis Nash
Updated over a week ago

Temperature Probe Setup Guide

Purpose: This guide will help you set up and use a temperature probe with the Jolt App. Temperature probes are used to record temperature readings while completing lists. The Jolt App supports several models of temperature probes. Follow these detailed steps to set up your temperature probe correctly.

Supported Temperature Probes:

  • Cooper-Atkins Blue2 Kit

  • ThermoWorks TempTest Blue

  • ThermoWorks BlueTherm One Kit

  • ThermoWorks RayTemp Blue (Infrared)

  • ThermoWorks DishTemp Blue

Prerequisites:

  • Ensure that your temperature probe is fully charged or has fresh batteries.

  • Confirm that the Jolt App is installed on your device and is updated to the latest version.

Setup Instructions:

  1. Open the Jolt App:

    • Launch the Jolt App on your device.

  2. Navigate to the Temperature Tools:

    • Tap on the Tools icon in the app’s main menu.

    • Select Temperature Probe from the list of available tools.

  3. Prepare the Temperature Probe:

    • Turn on the temperature probe by pressing the power button on the device. Ensure it is in pairing mode; refer to your probe’s manual if needed.

    • Place the probe within range of your device. Typically, a distance of a few feet should be sufficient.

  4. Connect the Temperature Probe:

    • On the Temperature screen in the Jolt App, you will see a message: Turn on Probe.

    • Wait for the app to detect the probe. This may take a few moments.

    • Once the probe is detected and connected, the status will change to Ready.

    Troubleshooting Connection Issues:

    • Probe Not Connecting:

      • Tap on Select Probe to manually search for available probes.

      • If the probe does not appear, ensure Bluetooth is enabled on your device and that the probe is in pairing mode.

    • Retry Connection:

      • If the probe still does not connect, try turning the probe off and on again and repeat the connection process.

  5. Using the Temperature Probe:

    • Once connected, you can use the probe to record temperature readings while completing lists in the Jolt App.

    • For detailed instructions on how to use the temperature probe within a list, refer to the article: Temperature Probe Application.

  6. Additional Settings:

    • If needed, adjust any settings related to the temperature probe within the Jolt App. This might include calibration settings or unit preferences (Celsius/Fahrenheit).

  7. Complete the Setup:

    • Ensure the probe remains connected during your use. If the probe disconnects, repeat the connection steps.

Helpful Tips:

  • Keep your device and probe within close proximity to avoid disconnection issues.

  • Regularly check for updates to the Jolt App to ensure compatibility with your probe.

  • Consult your probe's user manual for specific instructions related to its model.

Related Articles:

  • Temperature Probe Application

  • Troubleshooting Common Probe Issues

If you experience persistent issues with the temperature probe setup or connection, contact Jolt Technical Support for assistance.

Did this answer your question?