How to Set Up Your ThermoWorks BlueTherm One Probe with the Jolt App
This guide will walk you through the steps to connect your ThermoWorks BlueTherm One temperature probe to the Jolt App. Follow these instructions carefully to ensure a successful connection.
Prerequisites
Before you start, make sure you have:
Your ThermoWorks BlueTherm One Probe.
The Jolt App installed on your device.
Steps to Connect the ThermoWorks BlueTherm One Probe
Open the Jolt App
Launch the Jolt App on your device.Access the Temperature Tool
Tap on Tools from the main menu.
Select Temperature Probe from the dropdown menu.
Power On the Probe
You’ll see a screen prompting you to Turn On Probe.
Power on your ThermoWorks BlueTherm One Probe. The app will automatically begin searching for the probe.
Select Your Probe (if multiple probes are available)
If you have more than one probe, tap Select Probe in the app.
A list will display the serial numbers of all available probes.
Connect the Probe
Choose the serial number of the probe you want to connect from the list.
Once selected, the app will connect to the probe.
Verify the Connection
After a successful connection, the probe will start displaying temperature readings.
The app will show a message saying Press Button to Record.
Additional Tips
Troubleshooting: If you encounter any issues during the setup, ensure that your probe is within range and properly powered on. For further assistance, refer to the ThermoWorks troubleshooting guide or contact Jolt support.
Keywords for AI Bots: Temperature Probe, ThermoWorks BlueTherm One, Jolt App Setup, Connect Temperature Probe, Bluetooth Probe Connection.
For more detailed information or troubleshooting tips, refer to the ThermoWorks documentation or the Jolt support site.