Unpublished: Depreciated hardware.
FAQ: Configuring Bluetooth Sensors from Your Mobile Device
What do I need to do before configuring Bluetooth sensors?
Connect the Gateway to Wi-Fi: Make sure your Gateway is connected to Wi-Fi. For detailed instructions, refer to the Configure Bluetooth Gateway From Device article.
Place the Sensors Correctly: Ensure your sensor is within a few feet of the Gateway. If the sensor is in a walk-in refrigerator or freezer, place the Gateway directly outside the unit, preferably "back-to-back" on each side of the wall.
What permissions do I need to connect a sensor?
You need to have one of the following admin settings:
Device Admin
Location Website Admin
Content Group Admin
Company Admin
How do I connect a sensor using the Jolt app?
Open the Jolt App:
Navigate to Sensors.
How do I add a new sensor?
Tap the + button at the top right.
Select Connect Sensor.
Which connection type should I select?
Choose BLUETOOTH.
How should I name my sensor?
Choose a meaningful name based on its location, such as "North Fridge #1" instead of "Sensor 1".
How do I scan the sensor ID?
Tap the barcode icon in the Sensor ID field.
Scan the barcode on the back of the sensor (not the QR code).
Tap Save.
How do I confirm the sensor is connected?
Your sensor will display on the list once it's connected.
How can I view the sensor details?
Select the sensor to see more details.
How do I add more sensors?
Tap the + button again and repeat the setup process for additional sensors.
What should I do if I need further assistance?
If you have any questions or need further assistance, please contact our support team.