The Jolt Print station is able to use the Jolt weight scale when printing labels. The following is how to set up the scale
STEP 1 - Unpack the scale
The shipping package should include four items:
Your Jolt Weight Scale
A power cord
Metal scale cover
Connector Cable
STEP 2 - Level your scale
In order to properly calibrate your Jolt Weight Scale, you will need to make sure that your scale is on a solid, level surface. To verify "level" you can check the green button near the edge of the scale:
If the bubble is in the center of the green button, then the scale is levle. If not, adjust the feet on the scale!
Step 3 - Assemble the Scale
Remove the plastic from the metal scale cover
Inster the metal scale cover into the four corresponding holes on the scale
Step 4 - Connect the scale to the Jolt Print station.
With your Cable in hand connect the RJ11 connector
to the scale
Next connect the USB end of the cable to the JPS
Plug the power supply into a surge protector and turn on your scale
Below are some of the scale specifications:
