Skip to main content
All CollectionsLabelingLabel Creation and Editing
How to Print Labels from the iPad Using the Jolt App
How to Print Labels from the iPad Using the Jolt App
Curtis Nash avatar
Written by Curtis Nash
Updated over a week ago

How to Print Labels from the iPad Using the Jolt App

This guide will walk you through the steps to print single and multiple labels from the Jolt App on your iPad. Follow these instructions to ensure your labels are printed correctly.


1. Open the Jolt App

  • Login: Enter your 4-digit PIN to access the app.


2. Access the Labels Section

  • Select Labels: Tap on the “Labels” option in the app’s menu.

  • Choose a Category: Pick the relevant category where your labels are organized.


3. Prepare the Printer

  • Check Printer Connection: Ensure your Zebra label printer is connected to your iPad. If you’re using a wireless printer, make sure it is on the same Wi-Fi network as your iPad.

  • Verify Label Size: Confirm that the correct label size is loaded in the printer and matches the label size selected in the app.


4. Print a Single Label

  • Select Product Name: Tap on the product name you want to label. The app will send the print command to your printer, and one label will print out.


5. Print Multiple Labels

  • Press and Hold: To print more than one label, press and hold the product name. A number pad will appear on your screen.

  • Enter Quantity: Use the number pad to enter the number of labels you want to print.

  • Select Print: Tap the “Print” button to start printing the specified number of labels.


Additional Resources

Tips for Successful Printing:

  • Keep the Printer and iPad Close: Ensure that your iPad and printer are within range of each other to avoid connection issues.

  • Regularly Check Supplies: Make sure your label rolls and printer ribbons are not running low before starting large print jobs.

If you encounter any issues or need further assistance, please reach out to our support team.

Did this answer your question?